Filter
Top Products
20 CHAPTER 2: INSTALLATION SCRIPTS
Dual Server Configuration
General installation steps:
1 On the primary server, run the vcx-setup script:
a When prompted to select the services the system will provide, select 1
(presence and conference - all in one).
b When prompted to select a database configuration, select 1 (Local
Master).
c When prompted to start the 3Com IP Conferencing Services, enter Y.
All services will start except DB_watchdog. It starts after the secondary
server is installed and the database replication process is initiated.
2 On the secondary server, run the vcx-setup script:
a When prompted to select the services the system will provide, select 3
(Conferencing and database server).
b When prompted to select a database configuration, select 2 (Local
Slave).
c When the script asks whether you have run remote_access.sh, do the
following:
n On the primary server, run remote_access.sh <secondary-server
hostname | IP>
d Return to the secondary server and enter Y at the prompt.
e When prompted, enter the password of the primary (master) server.
f When prompted to start the 3Com IP Conferencing Services, enter Y.
3 Complete the post-installation configuration (see Post Installation
Configuration).
Multiple Server Configuration (Four to Twelve Servers)
General installation steps:
1 On the primary server, run the vcx-setup script:
a When prompted to select the services the system will provide, select 5
(Presence server with database).
b When prompted to select a database configuration, select 1 (Local
Master).
c When prompted to start the 3Com IP Conferencing Services, enter Y.