Filter
Top Products
Initial Installation - Configuration Guidelines 21
All services will start except DB_watchdog. It starts after the secondary
server is installed and the database replication process is initiated.
2 On the secondary server, run the vcx-setup script:
a When prompted to select the services the system will provide, select 4
(Data server for presence and conferencing).
b When prompted to select a database configuration, select 2 (Local
Slave: this server will have a slave database).
c When prompted, enter the hostname of the primary (master) server.
d When the script asks whether you have run remote_access.sh, do the
following:
n On the primary server, run remote_access.sh <secondary-server
hostname | IP>
e Return to the secondary server and enter Y at the prompt.
f When prompted, enter the password of the primary (master) server.
g When prompted to start the 3Com IP Conferencing Services, enter Y.
3 On each of the conference servers (up to ten), run the vcx-setup script:
a When prompted to select the services the system will provide, select 2
(Conferencing server).
b When prompted to select a database configuration, select 3 (Remote
database: database is on another server).
c When prompted, enter the hostname of the primary (master) server.
d When the script asks whether you have run remote_access.sh, do the
following:
n On the primary (master) server, run remote_access.sh
<conference-server hostname | IP>
n On the secondary (slave) server, run remote_access.sh
<conference-server hostname | IP>
e Return to the conference server and enter Y at the prompt.
f When prompted to start the 3Com IP Conferencing Services, enter Y.
4 Complete the post-installation configuration (see Post Installation
Configuration).
Run the vcx-setup script only for “fresh” software installations where the
VCX Linux server is not already running the IP Conferencing Module.