Filter
Top Products
UIP200 User's Manual
Page 27 of 27
Rev. 1.0, © UAC, May, 2004
! NOTE:
The local date and time can also be derived from the Date
Header field in the response to a register request. User should
set time to local time not GMT time.
Network Setting
The Network Setting sub-menu is used to assign network settings such as the IP Address, Subnet
Mask and Default Gateway. All sub-menus under Network Setting are password protected and
can be altered only by an administrator. Users may view the information but not change it.
View Info
The View Info sub-menu allows users to view the IP address and firmware version.
Step 1: Press the
MENU key to enter the Setup menu
Step 2: Scroll down to highlight the View Info sub-menu and press
MENUagain.
Step 3: The phone will display the current firmware version and IP address of the
terminal.
Step 4: Press the
CANCEL key to exit the sub-menu.