Filter
Top Products
UIP200 User's Manual
Page 25 of 27
Rev. 1.0, © UAC, May, 2004
Clearing or Editing the 2-Touch Number
Step 1: Enter the 2-Touch Dial sub-menu as describe above.
Step 2: Press the 2-touch dial key (default is programmable key 6) and then press the
already-programmed dial key (0-9) you wish to clear or edit.
Step 3: If you want to edit the phone number, change the number and press the
MENU
key. If you want to clear the phone number, simply press the MENU key without
editing the phone number.
Step 4: You will hear a long beep confirming your changes to the 2-touch dial key.
Phone Settings Sub-Menu
There are a total of six sub-menus inside the Phone Settings sub-menu. You can
only access the LCD Contrast, Adjust Time and Language sub-menus. The
Preferred Codec, Factory Reset and Auto Config sub-menus are available to
administrators only.
Changing the LCD Contrast
The LCD Contrast sub menu allows the user to configure the contrast setting of the
LCD display.
Step 1: Press the
MENU key to enter the Setup menu
Step 2: Scroll down to highlight the Phone Settings sub-menu and press
MENU again.
Step 3: Highlight the LCD Contrast sub-menu and press MENU.
Step 4: Use the ▲ and ▼ keys to set the LCD display to the desired contrast.
Step 5: When the LCD display reaches the desired contrast level, press
MENU to save the
setting. Press the
CANCEL key to exit the sub-menu without saving.
Changing the Display Language
You can set the language of the display to English, French, or Spanish.
Step 1: Press the MENU key to enter the Setup menu