Filter
Top Products
UIP200 User's Manual
Page 22 of 27
Rev. 1.0, © UAC, May, 2004
a new voice message arrives, the VISUAL RINGER LED illuminates to notify you
that a new message is waiting. To access your voice mail, follow the steps below:
Step 1: Pick up the cradle or press the
HEADSET/SPEAKER key.
Step 2: Select the appropriate 1-
TOUCH key. If you programmed the DIAL key as part of
the number, the phone will start connecting immediately; otherwise, connection
will start the after approximately 4 seconds.
Mute
Programmable Key 8 is pre-programmed as the MUTE key. During a call, you can
press MUTE to disable the microphone on the handset, speakerphone or headset.
While the Mute feature is activated, the MUTE LED remains on. To deactivate the
Mute feature, press the MUTE key again.
Dial (fixed key)
The DIAL key sends dialed digits without the usual four-second delay. The DIAL key
may be entered while programming a speed dial number to eliminate the delay
when speed dialing.
Emergency Proxy
The UIP200 provides an Emergency Proxy feature that allows the user to access a
SIP Emergency Proxy Server with pre-defined 2-digit dial plan. To execute a call
via the emergency proxy dial the two digit prefix followed by the number.