Filter
Top Products
UIP200 User's Manual
Page 23 of 27
Rev. 1.0, © UAC, May, 2004
Configuring the Telephone
The main configuration menu is the Setup menu. This menu consists of five
submenus that allow you to configure and display information about the UIP200.
Table 5 shows the available menus and their uses.
Table 5 Configuration Menus and Their Functions
Menu Used To
Speed Dial
Configure 1-Touch and 2-Touch Speed Dial numbers
Phone Setting
Set terminal specific features such as LCD contrast, Language, Date
& Time
Network Setting
Available to the administrator only
View Info
Display the telephone IP address and firmware version.
Unlock Config
Available to the administrator only
Navigating the Menus
The following information will help you understand the interface for the
configuration menus.
#
#
#
#
#
#
Press the MENU key to access the Setup menu.
Use the ▲ and ▼ keys to scroll through the menu choices.
When the desired menu option is highlighted, press the MENU key again to
select the highlighted option.
Press the CANCEL key to return to the previous screen.
When a setting is successfully changed, you will hear a long beep. If an error
occurs, you will hear a series of short beeps.
If no key is pressed for 60 seconds during any menu operation, the phone will
cancel menu operation and return to standby mode.
Speed Dial Sub-Menu
The Speed Dial sub-menu is the first item inside the Setup main menu. You will use
this menu to program or edit 1-touch and 2-touch speed dial numbers.
Programming a 1-Touch Number
Step 1: Press the MENU key to enter the Setup menu