Filter
Top Products
UIP200 User's Manual
Page 14 of 27
Rev. 1.0, © UAC, May, 2004
Installation and Basic Setup Instructions
Wall-Mounting the Telephone
The wall mount bracket is included with the UIP200. The wall mount bracket can
be attached to the bottom of the UIP200, allowing the user to wall mount the
telephone. The bracket can only be attached one way. Once the bracket is attached,
the phone may be mounted over an existing wall plate.
Figure 1 Attaching the Wall Mount Bracket
Attach the wall mount bracket to the rear of
the phone. Be sure the wide end of the
bracket is at the bottom of the phone and
the narrow end is at the top.
Figure 2 Mount the Phone on the Wall
Plate
After attaching the wall mount bracket,
place the bracket holes over the screws of a
standard wall plate. Push the phone in and
slide it down until it is securely seated on the
plate.