Filter
Top Products
55
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects. This feature
is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone
prescription rells, customer support menus, etc. If your phone is set to pulse dialing, make your call normally. Once
your call connects, press
[
tone
] on the handset or base. Any digits you enter from then on will be sent as tone dialing.
When this call ends, the phone automatically returns to pulse dialing.
Installing the Optional Headset
Your phone may be used with an optional headset. To use this feature, insert the head-
set plug into the headset jack on your cordless handset. Your phone is ready for hands-
free conversations. Headsets may be purchased by calling the Uniden Parts Depart
-
ment. See back cover pag
e for contact information.
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits (instead of 10), you can program
your local area code in to your phone. If you get a call from within your area code, you’ll
only see the 7-digit phone number. If you get a call from outside your area code, you’ll
see all 10 digits. To enter an area code, follow the steps below:
Press the
MENU soft key. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
Move the cursor to select
or . Press the OK soft key.
Use the number keypad (
0-9) to enter a 3-digit area code. If an area code has already been stored, it will ap-
pear in the display. Press the
DELETE soft key to delete the stored code, and then enter a new one.
Press the
OK soft key. You will hear a conrmation tone.
1)
2)
3)
4)