Filter
Top Products
18
Installing the Belt Clip
Line up the holes on each side of the handset. To attach the belt clip, insert into the holes
on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs from the holes.
Connecting to the Phone Line
Once the handset battery pack is fully charged, connect the
telephone line cord to the TEL LINE 1/2 jack and to a tele
-
phone outlet.
For 2 line subscriptions,
If the two phone lines are in one modular jack, connect
using TEL LINE 1/2 jack.
If the two phone lines are on two separate modular
jacks, connect using both TEL LINE 1/2 and TEL LINE
2 jacks.
1)
2)
•
•