Filter
Top Products
52
Using the DirectLink Feature
A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea-
ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone
calls while in use. To activate, you must set both handsets to the DirectLink feature. While using
this feature, these two handsets will not be able to make or receive normal phone calls until this
operation is canceled; however, other handsets will function normally.
Note: If the party is out of range, OUT OF RANGE appears in the display and the operation will
be canceled.
Press the
MENU soft key and move the cursor to the DIRECTLINK menu.
Press the
OK soft key. The display shows TO ENTER DIRECTLINK MODE PRESS
[ENTER].
Press the
ENTER soft key. You will hear a conrmation tone, and DIRECTLINK MODE
COMPLETE appears in the display.
Making a DirectLink Call
To call another handset with DirectLink, press the DIRECTLINK soft key.
Move the cursor to select the handset you want to call, and press the
OK soft key.
If the handset is out of range or not in DirectLink operation, the display shows
OUT OF RANGE.
On the receiving handset, press the
ANSWER soft key or [ /ash].
Exiting a DirectLink Call
To exit the DirectLink feature and return to standby, press the CANCEL soft key and then the OK soft key. DI-
RECTLINK MODE CANCEL appears in the display.
1)
2)
3)
1)
2)
3)
Monitoring
｣｣
Handset #2
END
LINE1
LINE2
Monitoring
｣｣
Handset #2
END
LINE1
LINE2