Filter
Top Products
47
Using Hold, Conference and Transfer
Placing a Call on Hold
During a call, press [int’com/hold] to place the caller on hold. The line key (the LINE1 or LINE2 soft key) to
be placed on hold will ash. The call will be put on hold.
Note: If you leave a caller on hold for more than ten seconds, the display screen will read, HOLD.
To return to the party on hold, press
[ /ash] or [ ] on a handset or press [ ] on the base. Or press the
corresponding line key (the
LINE1 or LINE2 soft key). The phone will return to the holding party.
Note:
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party’s line will be dis
-
connected and the phone will return to standby.
While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one cordless handset, up to seven people can participate in a conference call. A seven-way
conference call consists of outside Line 1 + outside Line 2 + base + four handsets. Only four handsets can partici
-
pate in any conference call. You can easily join a call already in progress.
Press corresponding line key (the
LINE1 or LINE2 soft key) to join the conference call.
To hang up, return the cordless handset to the cradle or press
[ ] on the handset or press [ ] on the base.
The other party will still be connected to the call.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base join the call.
Conferencing with 2 outside lines
Follow the steps below to allow both outside lines to participate in a conference call:
During a call, press
[int’com/hold] on the handset or base to put the rst caller on hold.
Press the line key (
LINE1 or LINE2 soft key) for a free line to make or answer a second call.
1)
2)
•
•
1)
2)
1)
2)