Filter
Top Products
46
T-coil (Handset only)
Digital spread spectrum cordless phones generate magnetic signals that could cause noise to be heard by users
wearing hearing aids set to “T” mode. (The “T” mode is only found on hearing aids equipped with a telecoil (“T” coil)
feature). This phone includes a special “T-coil” mode that, when activated, reduces the magnetic noise generated by
the handset. To activate the “T-coil” mode perform the following steps on your handset:
Press the
MENU soft key.
Select the HANDSET SETUP menu, and then the T-COIL submenu.
Move the cursor to select ON or OFF.
Press the
OK soft key. You will hear a conrmation tone.
Note: Using the T-coil feature may shorten your battery’s talk time, please set to off when not using this feature.
Finding a Lost Handset
To locate a misplaced handset, press [ash/nd hs] on the base when the phone is in standby. All registered hand-
sets will beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any key on the
found handset or
[ash/nd hs] on the base.
Note: If the battery pack is completely drained, the handset will not beep when paged.
1)
2)
3)
4)