Filter
Top Products
53
Intercom
Making an Intercom Page
You can use the intercom to talk to another station without using the phone line.
With the phone in standby, press
[int’com/hold].
Use
[ ] or [ ] to select the handset or base you want to talk with, and then press the OK soft key. If you se-
lect ALL, all other handsets and base will be paged. An intercom tone sounds. To cancel intercom, press the
CANCEL soft key.
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the station that is
paging.
Press
[ /ash], [int’com/hold], or the ANSWER soft key on the handset. Or
press a number key,
[
tone
], or [#] (when Any Key Answer is enabled), or pick up
the handset from the cradle (when AutoTalk is on). To answer with the base speakerphone, press
[int’com/
hold], [ ], or the ANSWER soft key on the base.
To hang up an intercom page, press the
END soft key or [ ] on either handset (or press the END soft key or
[int’com/hold] on the base).
Note:
If the party is busy, the handset returns to standby.
If the party is out of range, the operation will be canceled.
If you receive an outside or intercom call or page while selecting the other handset, the operation is canceled.
If you do not select a handset within 30 seconds, the operation will be canceled.
If the party does not answer within one minute, the operation is canceled.
1)
2)
1)
2)
•
•
•
•
•
Intercom
｢｢
Handset #1
ANSWER
Intercom
｢｢
Handset #1
ANSWER