Filter
Top Products
50
Using Special Features
Do Not Disturb (All Calls)
DND allows you to mute the ringer of all registered handsets and the base. With the phone in standby, press and
hold
[dnd] on the base. You will hear a conrmation tone and the dnd LED illuminates. To cancel, press [dnd] again.
You can also mute the ringer tone while the phone is ringing by pressing
[dnd] on the base.
Muting the Ringer (One Call Only)
While a handset is ringing, press the MUTE soft key on the handset or base, or [ ] on the handset or [mute/exit] on
the base to mute the ringer for this call. The phone will ring again normally on the next call. (The handset must be off
the cradle to mute the ringer.)
Muting the Microphone
Mute turns off the microphone so the caller can not hear you. The display shows the MUTE ON icon while the micro-
phone is muted.
From the handset
While you are on a call, press the
MUTE soft key.
MUTE ON will appear in the display for 2 seconds, but
に
icon will appear and remain in the display until the
feature is turned off.
To cancel muting, press the
MUTE soft key again. MUTE OFF appears.
From the base
While you are on a call, press
[mute/exit].
MUTE ON will appear in the display for 2 seconds, but the
に
icon will appear and remain in the display until
the feature is turned off.
To cancel muting, press
[mute/exit] again. MUTE OFF appears.
1)
2)
3)
1)
2)
3)