Filter
Top Products
19
Testing the connection
To test your connection, try making a call. If your call connects, the settings are ne. If your call does not connect,
check the following:
Check the AC adapter cord. Make sure it is securely connected to the DC IN connector and to a standard AC
power outlet.
Check to make sure the battery is fully charged. (If you don’t see the “battery full” icon, check to make sure
the battery is properly connected.)
Change dial mode (instructions on page 2
0).
Selecting a Telephone Line
TEL-LINE allows you to set the default telephone line. The line you select will be used
when you make a call. If you select Auto,the phone will default to whichever line is cur
-
rently free.
Press the
MENU soft key. Select the HANDSET SETUP or BASE SETUP menu,
and then the SET TEL-LINE submenu.
Move the cursor to select AUTO, LINE1, or LINE2.
Press the
OK soft key. You will hear a conrmation tone.
1)
2)
3)
1)
2)
3)
Set TEL‑LINE
Auto
Line1
BACK DELETE OK
Set TEL‑LINE
Auto
Line1
BACK DELETE OK