Filter
Top Products
QUICK REFERENCE GUIDE [ 5]
Q
UICK
R
EFERENCE
G
UIDE
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery
pack connector with
the correct polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into
the base unit and then to a
120V AC outlet.
Place the handset in the base.
Note:
You must charge the battery pack
continuously
for 15-20 hours
before using the phone.
Step 1 Charging the Battery Step 2 Connecting
Step 3 Setting up the Caller
ID Options/Language
Step 4 Setting up
Answering System
CONNECT TO A PHONE LINE
When the handset battery pack is fully
charged, plug the telephone cord into
the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your
local network requires pulse dialing, please
see “Setting up the phone, Choose the
dialing mode” in your owner’s manual.
Note: Three Caller ID options
are available: Auto Talk, Caller
ID on Call Waiting (CIDCW) and
Area Code.
TO TURN THE ANSWERING
SYSTEM ON/OFF
Press answer on/off to turn On the
system. To turn Off the system, press
answer on/off again.
TO SET GREETING MESSAGE
Press and hold greeting.
Start recording your message.
Position yourself as near to the
base as possible.
When finished, press
greeting
or .
TO SELECT CALLER ID OPTIONS
Press menu/mute.
Press
+ or - to move the pointer to
“Caller ID Setup”, then
press select/ch.
Press
+
or
-
to move the pointer to
an option, then press
select/ch
.
Press
+
or
-
to change the
option setting.
Press
select/ch and return the
handset to the base.
TO CHOOSE THE LANGUAGE
Press menu/mute.
Press
+ or - to move the pointer
to “Language”, then
press select/ch.
Press
+ or - to change the
option setting.
Press select/ch and return the
handset to the base.