Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 44 ]
Setting the Time
The clock on the answering system starts when power is supplied to the base. Follow these
steps to set the clock to the correct time.
1) Press menu.
The system announces the current time. The message counter displays the day of the week
(from “ ” Sunday to “ ” Saturday).
2) Press or until the correct day is announced and the corresponding number appears.
3) Press
set/ringer to select the day.
4) Press or until you hear the correct hour setting.
The numbers “ ” through “ ” appear on the base as each hour is announced.
5) Press
set/ringer to select the hour.
6) Press or until you hear the correct minute setting.
The numbers “ ” through “ ” appear on the base as each minute is announced.
7) Press
set/ringer to select the minute.
8) Press or until you hear the correct AM or PM setting.
The message counter displays “ ” or “ ”.
9) Press
set/ringer to select the AM/PM setting.
A confirmation tone sounds, the system announces “Time” and, the day and time are
announced for your review.
Setting a Personal Security Code
To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code ( - ). To select a PIN, perform the following steps:
1) Press
menu twice. The current PIN code is announced as it appears on the base.
2) Press or until the desired number appears.
3) Press
set/ringer to select the PIN code.
A confirmation tone sounds, the system announces “Security code” and the new PIN code.
• Normally the idle time
for the menu mode is 30
seconds before the
system returns to
standby. However, for
setting the time, the
idle time is extended to
two minutes.
• Press and hold or
to quickly scroll
through the numbers on
the display.