Filter
Top Products
BASICS
[ 23 ]BASICS
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone’s channel for clear operation. This function works only when the phone is in use.
Press select/ch.“
Scanning” appears on the display, indicating the phone is changing
to another channel. For more information on interference, refer to “Radio Interference” on
page 64.
3-Way Conferencing
The phone permits 3-way conversations between the handset, base, and an outside line.
When speaking on the handset
1) Press (talk) on the base to initiate the 3-way conversation.
2) To hang up, press (talk) on the base. The handset will still
be connected to the call.
When speaking on the base
1) Press talk/flash on the handset to initiate the 3-way conversation.
2) To hang up, return the handset to the base, or press
end on
the handset. The base will still be connected to the call.
Find Handset
To locate the handset, press find handset/transfer on the base
when the base is in the standby mode. The handset beeps for 60
seconds, and “
Paging” appears on the handset display.
Paging is canceled when pressing any key on the handset or
find handset/transfer on the base. Additionally, if you receive
an incoming call, page is canceled.
• If you press xfer/del
on the handset during
the 3-way conversation,
error tone sounds.
• During the 3-way
conversation, all the
base keys except
(talk), volume
^
v
,
and mute are disabled.
• If the base and handset
do not connect in 30
seconds, the operation
is canceled.
• 3-way conferencing is
not permitted between
the handset
speakerphone, base
speakerphone and an
outside call. If you
press (talk) on the
base when using the
handset speakerphone,
you will hear a beep,
and vice versa.
• If the handset battery is
completely drained, the
handset will not beep
when paging.