Filter
Top Products
58
3-J. ALARM CLOCK
This feature is only available when the GPS is connected to the
NMEA0183 jack. If it is connected to the GPS, the alarms are set based
on the satellite. You need to set the time previously to setting the alarm.
3-J-1. ALARM SET
This feature allows you to set the alarm.
1. Press and hold
H/L/MENU for
2 seconds.
2. Press the
PUSH – SELECT knob at
SETUP, the SETUP menu appears.
3. Rotate and press the
PUSH –
SELECT knob to select ALARM
CLOCK
.
4. Press the PUSH – SELECT knob,
the following screen appears.
5. Press the
PUSH – SELECT knob at
ALARM SET.
6. You can set the hour, minutes, am or
pm by rotating the
PUSH – SELECT
knob. It will be entered when the
PUSH – SELECT knob is pressed,
and blinking digit moves to the right.
7. Press the
PUSH – SELECT knob
after you have selected am or pm.
A confirmation screen appears.
Press the PUSH – SELECT knob
and the POLARIS returns to the
ALARM CLOCK menu.
HI CAN
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH.TAG
WHAM
ALARM CLOCK
ON
OFF
ALARM SET
ALARM SET
00:00 A
ALARM SET
10:00P
SET
CANCEL
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 58