Filter
Top Products
49
3-F. AUTO CHANNEL SWITCH
This feature is to allow you to disable the automatic channel change that
happens when receiving a DSC call. This feature is useful when
engaged in bridge – to – bridge or other safety related calls. When you
have completed these calls, all of the incoming DSC calls received are
available in the call log.
1. Press and hold
H/L/MENU for
2 seconds.
2. Press the
PUSH – SELECT knob at
SETUP, the SETUP menu appears.
3. Rotate the
PUSH – SELECT knob to
select AUTO.CH.SW.
4. Press the
PUSH – SELECT knob,
and the following screen appears.
5. If you want to change this mode to
OFF, you can change it by rotating
the PUSH – SELECT knob.
(Default is set as
ON.)
6. Press the
PUSH – SELECT knob
and the POLARIS returns to the
channel display screen.
HI CAN
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
FIPS
USER MMSI
GROUP MMSI
U.I.C.
DIRECTORY
AUTO.CH.SW
ON
OFF
ON
OFF
HI CAN
MEM
TELEPHONE
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 49