Filter
Top Products
55
3-I. WHAM
This feature, from the setup menu, will allow you to connect the WHAM.
Note: When you use the WHAM in addition to the POLARIS wired
mic, please set the BASE ID for the WHAM the same as the
POLARIS. (Please refer to the Owners Manual for the WHAM).
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP, the SETUP menu appears.
3. Press the PUSH – SELECT knob at
WHAM, the WHAM menu appears.
4. Press the
PUSH – SELECT knob,
and the following screen appears.
U.I.C.
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
HI CAN
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
BASE ID
LINK CH
EXIT
8. The POLARIS returns to the
following screen.
CH01
CH02 TELEPH
CH03 TELEPH
CH04 INTL
CH05 VTS
CH06 SAFETY
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 55