Filter
Top Products
15
To cancel the channel in Memory, press and hold SCAN/MEM for 2
seconds and the MEM icon disappears.
Note: The Memory channel can be set independently in 3 regional
modes (USA, INT, and CAN). You cannot use this feature in
WX mode or for channel 70.
Triple Watch Scan
To turn Triple Watch Scan On, press and hold 16/9/TRI for 2 seconds.
Although the current channel is scanned, PRI 16 CH and PRI 9 CH are
scanned every 2 seconds. Then "TRI" appears.
Normal Scan
To turn Normal Scan On, press SCAN/MEM, and then press and hold
16/9/TRI for 2 seconds. Although Memory CH is scanned, PRI 16 CH
and PRI 9 CH are not.
Triple Watch Alert Scan
To turn Triple Watch Alert Scan On, press and hold WX/ALERT for
2 seconds while in Triple Watch mode. Although Memory CH is
scanned, MRN 16 CH and MRN 9 CH are scanned every 2 seconds,
and WX CH is scanned every 7 seconds. "TRI" and "ALT" appear on
the LCD.
Alert Scan
To turn Alert Scan On, press and hold WX/ALERT for 2 seconds.
Although Memory CH is scanned, WX CH is scanned every 7 seconds.
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 15