Filter
Top Products
57
4. Press the PUSH – SELECT knob at
LINK CH, the following screen
appears.
5. Rotate the
PUSH – SELECT knob
clockwise to increase the number,
counterclockwise to decrease.
The number will be entered when the
PUSH – SELECT knob is pressed.
6. After the LINK CH is entered, a
confirmation screen appears.
Rotate the
PUSH – SELECT knob,
and then press PUSH – SELECT.
Note: You can select the channel 01-20.
LINK CH
05
LINK CH
05
YES
NO
3-I-2. LINK CH
This feature allows you to change the channel between the POLARIS
and the WHAM if you encounter interference.
1. Press and hold
H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP, the SETUP menu appears.
3. Press the PUSH – SELECT knob at
WHAM, the WHAM menu appears.
U.I.C.
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
BASE ID
LINK CH
EXIT
HI CAN
MEM
TELEPHONE
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 57