Filter
Top Products
[73] MULTI-HANDSET FEATURES
www.uniden.com
Intercom
The intercom feature lets you communicate with another handset or the base
without using the phone line.
Making an Intercom Page
From a handset
1) With the phone in standby mode, press hold/transfer/int'com.
2) Use volume up/down
to select the base or the
handset you want to talk with, and then press
select/ /audio tone. If you select
All
, all other
handsets and the base will be paged. An intercom
tone sounds.
To cancel intercom, press end.
From the base
1) With the phone in standby mode, press transfer/int'com/hold on the base.
2) Use volume up/down
to select the handset you want to talk with, and then
press the OK soft key. If you select
All
, all other handsets will be paged. An
intercom tone sounds.
To cancel intercom, press transfer/int'com/hold or the CANCEL soft key.
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the handset or
base that is paging.
6QKPVGTEQO
*CPFUGV
*CPFUGV
•If the party is busy or
out of range, the phone
returns to standby
mode.
•If you receive an
outside/intercom call
or page while selecting
the other handset (or
the base), the
operation will be
canceled.
•If you do not select a
handset or the base
within thirty seconds,
the operation will be
canceled.
•If the party does not
answer within one
minute, the operation
is canceled.
•If the party is out of
range,
Unavailable
appears in the display,
and the operation will
be canceled.
•If all handsets and the
base are paged, only
the first party to
answer the page will
connect.
note
MULTI-HANDSET
FEATURES