Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [68]
www.uniden.com
Remote access with the handset
You can operate your answering system from another room using a handset.
1) When the phone is in standby mode, press select/ /audio tone on the handset.
Remote operation press [0-8]
appears on the handset display. The answering
system announces the current time and the number of messages stored in the
memory.
2) You hear the announcement, "For help, press zero."
- To record a memo press 7.
- To record a personal greeting message, press 8.
3) If you have no messages, the answering machine will enter command waiting
mode.
If you have any incoming messages the answering system starts playing the
message. The total number of messages and the message number appears. The
time and day that each message was received is announced after the message is
played.
To stop the operation and proceed to another command, press 5,
or press end to exit the system.
4) Enter a command within 30 seconds.
While playing a message, enter a command from the following chart:
/1 Repeat a Message
/4
Delete a Message
/3
Skip a Message
/5
Stop Operation.
•For the Repeat a
Message function,
press /1 within
about four seconds to
repeat the previous
message, or press
/1 after about four
seconds to repeat the
current message.
•Messages will be
played in the order in
which they were
received. The time and
day that each message
was received is
announced after the
message is played.
•The greeting must be
more than two seconds
long and less than 30
seconds.
note
THE INTEGRATED
ANSWERING DEVICE