Filter
Top Products
BASICS [36]
www.uniden.com
Muting the Ringer
Do Not Disturb (DND)
The do not disturb feature (DND) allows you to mute the ringer of the base and any
registered handsets at the same time. The phone must be in standby mode. Press
and hold do not disturb on the base. You will hear a confirmation tone, and the
DND LED illuminates. To cancel the DND feature, press do not disturb again. You
can also mute the ringer tone while the phone is ringing by pressing do not disturb
on the base.
Temporarily Muting the Ringer
To mute the ringer tone temporarily for each handset or the base, while the phone
is ringing, press end on the handset or the MUTE soft key on the base. The mute
will last for the current incoming call only. The ringer tone will return to the
previous setting starting with the next incoming call.
Audio Tones
The audio tone feature provides three different tone levels. If you have difficulty
hearing a caller:
From the handset-Press select/ /audio tone. Each press of the key will change
the audio tone level.
From the base-Press the MENU soft key. Use /volume up/down to select
Audio
Tone Setup
, and press the OK soft key. Each press of the CHANGE soft key will
change the audio tone level. The default setting, Natural Tone, is recommended for
hearing aid users.
You can only mute the
handset ringer if the
handset is off the cradle
when the phone starts
ringing.
note
BASICS