Uniden DCT7488 Cordless Telephone User Manual


 
[67] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
1) After the answering system answers, the base speaker will let you hear the calls
as the machine records the message. To adjust the volume, press volume up/
down. If you set the answering system to off, you cannot screen a call.
2) To answer the call, pick up the corded handset or press on the base.
To mute the Call Screen, press the MUTE soft key or . To cancel muting, press
the SCREEN soft key.
From the handset
Press select/ /audio tone when the system is answering. To answer the call, press
talk/flash or .
The answering system will disconnect automatically.
Remote Operation
You can check, play, or delete messages when you are away from home or from
another room using a handset. Additionally, you can record, select, or delete your
own greeting message.
•If you press end before the answering system answers, the phone will return to standby.
•If the answering system does not answer within 6 seconds, you hear a beep and the
phone will return to standby.
•When you receive a call, the remote operation is canceled.
•You can change the handset volume during a remote operation.
•If you have new messages and old messages, after you have reviewed your new
messages, you can play your old messages by pressing /2 again.
•To switch to normal conversation, press on the handset.
•If you press select/
/audio tone while
another handset is
screening a call, you
will hear a beep and
you can not screen a
call.
•The time stamp will
not be heard until you
have set the time.
•When the answering
system is full,
appears on the base.
You should delete
some messages so that
the system can record
new messages. (Refer
to "Deleting a
message" on page 65.)
note
(7..
THE INTEGRATED
ANSWERING DEVICE