Filter
Top Products
GETTING STARTED [14]
www.uniden.com
E. Mount the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Detach the wall mount adapter from the bottom of
the base.
2) Snap the wall mount adapter into the notches on the
base bottom as shown.
3) Plug the AC adapter into the DC IN 9V jack. Wrap the
AC adapter cord inside the molded wiring channel as
shown.
4) Plug the AC adapter into a standard 120V AC wall
outlet.
5) Plug the telephone line cord into the TEL LINE jack.
6) Plug the telephone line cord into the telephone
outlets.
7) Raise the antenna to a vertical position.
8) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and down
until the phone is firmly seated.
9) Press and push up on the handset holder to lift and
remove it. Turn it over and rotate it 180°, then slide
it down into its slot and snap it back into place so it
holds the handset.
10)
Connect the handset cord to the left side of the phone
and corded handset.
GETTING STARTED