Filter
Top Products
[29] GETTING STARTED
www.uniden.com
System Reset (Handset only)
De-register the Handset
1) Press and hold end and #/ for more than 5
seconds. Select the Deregister HS submenu.
2) Press /vol/
∧ or /vol/∨ to select the handset
ID to be de-registered from the list, and then press
select/ /audio tone.
Deregister HS
appears.
3) Press /volume up/down to select
Yes
, and then
select/ /audio tone. You will hear a confirmation
tone.
4) After de-register the handset, move to "Replacing
the Base Setting" below.
Replacing the Base Setting
1) Press and hold end and #/ for more than 5
seconds. Select the Replacing Base submenu.
Replace Base
appears.
2) Press /volume up/down to select
Yes
, and then
select/ /audio tone. You will hear a confirmation
tone.
The base information will be deleted.
When the base information is deleted, the handset displays
Models vary! Charge
handset on the base for registration or refer to Owner's Manual
.
Register the handset to the new base (see page 17).
9JKEJ*CPFUGV!
*CPFUGV
*CPFUGV
>GIKUVGT*5
;GU
0Q
4GRNCEG$CUG
;GU
0Q
If you de-register
another handset,
perform "Replacing the
Base Setting" for the
handset after you de-
register it (see
page 29).
note
GETTING STARTED