Filter
Top Products
[59] MULTI-HANDSET FEATURES
www.uniden.com
Room/Baby Monitor
This feature allows you to monitor sounds in
another room. Place the base or a handset in
the room you wish to monitor; it will function
as a microphone. A second handset can be set
to function as a remote speaker, allowing you
to monitor sounds in the room.
Using Room/Baby Monitor
1) Press the MENU soft key and select Room
Monitor menu.
Listen to;
appears.
2) Select the handset or base you want to monitor by
using volume up/down.
3) Press the OK soft key.
Monitoring
appears, and you hear sounds in the room
where the handset or the base is installed.
4) To turn off the Room Monitor, press the END soft key, or end.
To prevent the monitoring of a particular handset or the base, simply turn off the
Room Monitor feature on that handset or on the base.
1) Press the MENU soft key. Select the Handset Setup
menu, and then the Room Monitor submenu.
2) Press volume up/down to select
Off
.
3) Press the OK soft key. You will hear a confirmation
tone.
Monitor using
handset or
base unit
•This feature only works
when both handsets
are within the range of
the base.
•If the party is out of
range,
Unavailable
appears in the display,
and the operation will
be canceled.
note
MULTI-HANDSET
FEATURES
UP772.book Page 59 Monday, August 29, 2005 1:15 PM