Filter
Top Products
[37] USING YOUR PHONE
www.uniden.com
From a second handset
1) Press corresponding soft key (LINE1 or LINE2) on the
handset to join the call.
2) To hang up, return the handset to the cradle, or press end
on the handset. The base or other handset will still be
connected to the call.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base
join the call.
Conferencing with 2 outside lines
Follow the steps below to allow both outside lines to participate in a conference call:
1) During a call, press intcom/hold on the handset or intercom/hold on the base
to put the first caller on hold.
2) Press the line soft key (LINE1 or LINE2) for a free line to make or answer a
second call.
3) When the second call is connected, press conference to initiate a conference
call.
4) To disconnect a single caller, press the corresponding soft key (LINE1 or LINE2)
to place the caller you wish to keep speaking to on hold and then press end on
the handset or speaker on the base to hang up the other caller. For example, to
hang up Line 2 but leave Line 1 connected:
-Press the LINE2 soft key to put Line 1 on hold.
-Press the END soft key to hang up Line 2.
-Press the LINE1 soft key to take Line 1 off hold and continue the conversation.
To hang up both lines, press end on the handset (or speaker on the base).
USING YOUR PHONE
UP772.book Page 37 Monday, August 29, 2005 1:15 PM