Filter
Top Products
USING YOUR PHONE [30]
www.uniden.com
From the Handset Speakerphone
1) Remove the handset from the base.
2) Press speaker.
3) Listen for the dial tone.
4) Dial the number.
5) When the other party answers, talk into the microphone.
From the base
1) Press speaker. The phone will automatically
select a free line. To select a particular line,
press the LINE1 or LINE2 soft key.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Dial the number. If pause is required, press redial/pause.
2) Press speaker. The phone will automatically select a free line. To select a
particular line, press the LINE1 or LINE2 soft key.
Receiving a call
From the handset
1) Remove the handset from the base. (If AutoTalk is
on, the phone will automatically answer the call
when you pick it up.)
2) Press talk/flash or the corresponding soft key (LINE1
or LINE2).
•The handset
microphone is located
at the bottom of the
handset.
•For best performance,
use the speaker phone
in a quiet room and let
the caller finish
speaking before you
speak. If you or the
other party has
difficulty hearing,
adjust the speaker
volume.
•When using the base
speaker, position
yourself as near to the
base as possible and
speak clearly.
•To have the phone
select Line 1 or Line 2
instead of a free line,
set the default
telephone line (see
page 19).
note
USING YOUR PHONE
UP772.book Page 30 Monday, August 29, 2005 1:15 PM