Filter
Top Products
[57] MULTI-HANDSET FEATURES
www.uniden.com
From a handset
1) Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will
automatically answers when you pick it up. Or if Any Key Answer is enabled,
pressing a number key,
*
/tone/<, or #/> will answer the page.)
2) Press talk/flash, intcom/hold, or the ANSWER soft key.
From the base
To answer with the base speakerphone, press intercom/hold, speaker, or the
ANSWER soft key.
To hang up an intercom page, press the END soft key, or press end on the handset
or Intercom/hold on the base, or return the handset to the cradle.
Call Transfer Feature
The call transfer feature allows you to transfer a call between the base and a
handset or between two handsets.
From a handset
1) During a call, press intcom/hold on the handset.
The line soft key (LINE1 or LINE2) to be placed on hold will flash. The Call will
be put on hold.
2) Use press vol/ /cid or vol/ /redial/p to select the
base or the handset you want to transfer the call to,
then press the OK soft key. If you select
All
, all other
handsets and the base will be paged.
The call will automatically be placed on hold, and a paging tone sounds.
•If all handsets and the
base are paged, only
the first party to
answer the page will
connect.
•If you do not select a
handset or the base
within ten seconds,
the operation will be
canceled.
note
MULTI-HANDSET
FEATURES
UP772.book Page 57 Monday, August 29, 2005 1:15 PM