Filter
Top Products
MULTI-HANDSET FEATURES [56]
www.uniden.com
Intercom
The intercom feature lets you communicate with another handset or the base
without using the phone line.
Making an Intercom Page
From a handset
1) With the phone in standby mode, press intcom/hold.
2) Use vol/ /cid or vol/ /redial/p to select the base
or the handset you want to talk with, and then press
the OK soft key. If you select
All
, all other handsets
and the base will be paged. An intercom tone sounds.
To cancel intercom, press end or the CANCEL soft key.
From the base
1) With the phone in standby mode, press intercom/hold on the base.
2) Use volume/ or volume/ to select the handset you want to talk with, and
then press the OK soft key. If you select
All
, all other handsets will be paged.
An intercom tone sounds.
To cancel intercom, press intercom/hold or the CANCEL soft key.
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the handset
or base that is paging.
•If the party is busy,
the handset returns to
standby mode.
•If the party is out of
range, "
Unavailable
"
appears in the display,
and the operation will be
canceled.
•If you receive an
outside/intercom call
or page while selecting
the other handset (or
the base), the
operation will be
canceled.
•If you do not select a
handset or the base
within thirty seconds,
the operation will be
canceled.
•If the party does not
answer within one
minute, the operation
is canceled.
note
MULTI-HANDSET
FEATURES
UP772.book Page 56 Monday, August 29, 2005 1:15 PM