Filter
Top Products
[ 29 ]
1. Call your telephone number.
2. While the greeting message is played, press
##
and your PIN code within 2
seconds.
If the answering system is off, let it ring 10 times. The tone sounds. Then,
press
##
and your PIN code within 2 seconds.
3. The answering system announces the time and day and the number of messages
stored in memory. Then the message playback automatically begins.
4. You may continue to listen to your message, or you may select a command from
the following chart.
• During the remote
operation, displays
on the base.
• You must enter a
command within 15
seconds when entering
command waiting
mode is started
otherwise the
answering system
automatically hangs up
and returns to
standby.
• The system will only
playback messages for
four minutes and then
it returns to command
waiting mode. To
continue playing your
message, press
##
then
22
again within 15
seconds.
CCoommmmaanndd FFuunnccttiioonn
# then
11
Repeat a message
# then
22
Playing your messages
# then
33
Skipping a message
# then
44
Deleting a message
# then
55
Stop message playback
# then
66
Answering system on
# then
77
Voice memo record/stop (up to 4 minutes recording time)
# then
88
Greeting message record/stop
# then
99
Answer system off
# then
*
Room monitor
5. After all of your messages have played, or the playback time exceeds 4
minutes, you will hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at this time from the
chart above.
6. When you finish, hang up to exit the system.
The answering system automatically returns to standby.
THE INTEGRATED ANSWERING DEVICE
THE INTEGRATED
ANSWERING DEVICE
TRU3455 ENG 6/28/01 11:28 AM Page 29