Filter
Top Products
THE INTEGRATED ANSWERING DEVICE
[ 28 ]
VVooiiccee mmeemmoo
The voice memo function allows the user to record a message (up to 10 minutes)
on the base.
1. Press and hold
vvooiiccee mmeemmoo
until you hear a tone. The message counter LED
blinks.
2. Speak into the microphone.
3. When you have finished, press
vvooiiccee mmeemmoo
or
ppllaayy
■
ss
to stop recording.
The system returns to standby.
4. To play voice memo, press
ppllaayy
■
ss
.
RReeccoorrddiinngg aa ccoonnvveerrssaattiioonn
You can record up to 10 minutes of conversation while you are making your call
from the handset.
1. During the conversation from the handset, press and hold
vvooiiccee mmeemmoo
on the
base. The unit begins recording and the LED blinks. Both parties can hear
tones every 15 seconds.
2. To stop the recording, press
vvooiiccee mmeemmoo
or
ppllaayy
■
ss
.
You cannot record a conversation while you are speaking on the base.
RReemmoottee aacccceessss aawwaayy ffrroomm hhoommee
You can operate your answering system from a remote location using any touch-
tone telephone. Use this function to check for recorded messages, to play or
delete messages, to record a new outgoing message, and to monitor sounds in the
room.
• The voice memo
function is completely
independent of the
outgoing message.
It´s handy for leaving
others a quick
message.
• A voice memo message
will be stored as a
typical recorded
message.
• Position yourself as
near to the base as
possible and speak
clearly.
• A recorded
conversation is stored
and played back with
typical recorded
messages.
TRU3455 ENG 6/28/01 11:28 AM Page 28