Filter
Top Products
THE INTEGRATED ANSWERING DEVICE
[ 26 ]
Using Your Answering System
SSeettttiinngg rriinngg ttiimmee sswwiittcchh
The ring time/toll saver switch allows you to set the number of rings the caller
hears before the answering system plays your outgoing message. You can set the
switch to answer after two rings or after four rings.
Once the greeting has started, you can stop it when you pick up the call at the
handset or base.
In the
TTSS
(Toll Saver) position, the answering system picks up after two rings if
you have new messages, and after four rings if there is none. This way, if you call
long distance to check your messages, you can hang up after the third ring to
avoid billing charges.
PPllaayyiinngg yyoouurr mmeessssaaggeess
The base LED shows the number of total messages on the display. If the display is
blinking, then there are new messages waiting for you. The TRU3455 is designed
to play your new messages first. After you play your new messages you can then
play your old messages.
1. Press
ppllaayy
■
ss
. The system announces the number of new and old messages,
then the incoming messages are played.
When all new messages have played, a tone is heard.
2. After you have reviewed all your new messages, you can play your old
messages again. Press
ppllaayy
■
ss
and follow the instructions above.
• If you answer at
another phone
extension and the
greeting has started,
you cannot stop the
message. Wait until
your greeting is
complete before
starting your
conversation.
• To stop playing your
messages, press
ppllaayy
■
ss
again.
TRU3455 ENG 6/28/01 11:28 AM Page 26