Filter
Top Products
[ 25 ]
SSeelleeccttiinngg tthhee mmeessssaaggee rreeccoorrdd ttiimmee
You can set your answering system to record messages up to
one or four minutes long.
One minute option: move the
RREECC TTIIMMEE
switch to
11
.
Four minute option: move the
RREECC TTIIMMEE
switch to
44
.
▼
Announce only feature:
The announce only feature plays an outgoing message, but it will not allow the
caller to leave a message. Move the
RREECC TTIIMMEE
switch to the
AANNNN
position.
The message counter LED displays “ “ when the system is on standby.
The prerecorded outgoing message for Announce only feature is:
“Hello, no one is available to take your call.“ (twice)
SSeelleeccttiinngg aa PPIINN ccooddee
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the
following steps.
1. On the base, press and hold
ppiinn
until a tone sounds and the LED displays .
2. To set the first number, press or repeatedly to scroll from 0 to 9.
When the desired number appears in the display, press
ppiinn
.
3. To set the second number, press or to scroll from 0 to 9. When the
desired number appears in the display, press
ppiinn
. Then the entered PIN code is
announced.
Press and hold or
to quickly scroll
through numbers on the
display.
THE INTEGRATED ANSWERING DEVICE
THE INTEGRATED
ANSWERING DEVICE
TRU3455 ENG 6/28/01 11:28 AM Page 25