Filter
Top Products
2
For wall mount use only
On the front of the base, pull the clip
(that holds the corded handset in
place) out of its slot.
Rotate the clip 180 degrees.
Flip it from front to back and slide it back into the slot.
Connect the power and telephone cords
Connect the base AC adapter to the
AC IN 7.8V
jack and the telephone
cord to the
TEL LINE
jack. Route the cords as shown below:
For desktop use For wall mount use
Plug the AC adapter into a standard 120 V AC power outlet, and
connect the telephone cord to a standard telephone wall jack.
Place the phone on the wall
Place the mounting slots over the
pins on the wall plate, and slide the
base down to lock it into place.
1)
2)
3)
1)
2)