29
your DSL service might have left some filters for you; if not, call your DSL
provider or look in any electronics store.
Plug the DSL filter into the telephone wall jack and then plug your phone’s
base into the filter. Make a test call to make sure the noise is gone.
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to replace
one, you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
Yes No
Press and hold
FLASH/EXIT
and
POUND
(#)
until the
System Reset
menu
appears (about 5 seconds).
Select
Deregister HS.
The display
lists all registered handsets.
Select the handset you want to reset.
When the phone asks you to confirm,
select
Yes
. The handset clears its
information from the base and deletes
it own link to the base.
1.
2.
3.
4.
Press and hold
FLASH/EXIT
and
POUND (#)
until the
System Reset
menu appears (about 5 seconds).
Select
Base Unavailable
.
When the phone asks you to
confirm, select
Yes
. The handset
deletes its own link without
contacting the base.
1.
2.
3.
When you reset a handset (or if you purchase a new one), that handset
displays a
Handset Not Registered
message. If you see this message on
a handset, you need to register it to a base before you can use it.
Registering a handset
On the base, open the menu and select
Register Handset
. The
display should say
Handset Registering
.
On the handset you want to register, press and hold
POUND (#)
until the
handset display says
Handset Registering (
about 2 seconds).
In about 30 seconds, the handset display should say
Registration
Complete
. Press
TALK
and make sure you get a dial tone.
If... Try...
you don't hear a dial tone
the display says
Registration Failed
-
-
Making sure the handset is fully
charged, then start over at step 1.
To register a handset to a different base, see the section "Expanding
Your Phone" in the user's guide for the other base.
1)
2)
3)