Filter
Top Products
ADDITIONAL INFORMATION[ 44 ] www.uniden.com
Symptom Suggestion
Severe noise interference. •Keep both handsets away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
•Move to another location or turn off the source of interference.
The Caller ID does not display. •The handset was picked up before the second ring.
•The call was placed through a switchboard.
•Call your local telephone company to verify your Caller ID service is current.
•Charge the handset.
Handset No.1 or No.2 •Make sure the battery pack is connected to the handset and fully charged.
is not working.
“
Unavailable” message is •Make sure the other handset is not already in use. Both handsets cannot be in
displayed on the LCD screen of talk mode at the same time.
the handset. •Place the handset in the base for at least 5 seconds to re-register to the base.
•Make sure the handset is not too far from the base when trying to use.
The handset doesn’t communicate •Re-register both handsets (see page 13).
with the base or the other handset. •Make sure that you have registered the second handset.
No 3-way conversation. •Only one handset at a time can talk with an outside caller. To allow the
other handset to talk to the caller, transfer the call.
Voice Message Indication •Contact your local telephone company to make sure that your telephone
does not work. receives FSK message signaling.
If you still have a problem. •Call our customer hotline at 1-800-297-1023.