Uniden Answering Machine Answering Machine User Manual


 
ADDITIONAL
INFORMATION
ADDITIONAL INFORMATION [ 43]www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom Suggestion
The charge/in use LED or charge LED Make sure the AC adapters are plugged into each charging cradle and wall outlet.
wont illuminate when the handset is Make sure both handsets are properly seated in each charging cradle.
placed in the base or charging cradle. Make sure the charging contacts on both handsets and charging cradles are clean.
The audio sounds weak Make sure that the base antenna is in a vertical position.
and/or scratchy. Move the handset and/or base to a different location away from metal
objects or appliances and try again.
Press the
select/channel key to help eliminate background noise.
Make sure that you are not too far from the base.
Cant make or receive calls. Re-register both handsets (see page 13).
Check both ends of the base telephone line cord.
Make sure the AC adapters are plugged into both the base and wall outlet.
Disconnect the AC adapter for a few minutes, then reconnect it.
Make sure that you are not too far from the base.
Make sure that the base antenna is in a vertical position.
The handset doesnt ring or Re-register both handsets (see page 13).
receive a page. The battery pack may be weak. Charge the battery for 15-20 hours.
The handset may be too far away from the base unit.
Place the base unit away from appliances or metal objects.
Check the battery pack to insure there is a secure connection.
Make sure the ringer volume isnt off.