Uniden Answering Machine Answering Machine User Manual


 
Step 2 Install and Charge the Handset Batteries
TO INSTALL THE HANDSET BATTERIES
When the handset battery pack
is fully charged, after 15-20
hours of charging, plug the
telephone cord into the base
unit and then into a telephone
wall jack.
Your phone is set for tone
dialing. If your local network requires pulse dialing,
please see “Choosing the dialing mode” on page 18.
A
Remove the cover.
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
A
Press and hold the cid/menu key in the
standby mode.
B
Press the vol/ring/ or vol/ring/
key to move the pointer to an option.
C
Press the select/channel key to change the
option setting.
D
Press the end key to exit, and return the
handset to the base.
OPTIONS INCLUDE
A
Auto Talk On/Off
B
CIDCW On/Off
(Caller ID on call waiting)
C
Area Code Enter/Remove
D
Dial Pulse/Tone
D
Plug the AC adapter cord into the base unit and
charging cradle and then into a 120V AC outlet.
E
Place the handset in the base and place the other
handset in the charging cradle.
It does not matter which handset is placed in the
base and charging cradle.
B
Connect the battery pack
connector with the
correct polarity.
C
Replace the cover.
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
QUICK REFERENCE GUIDE
Step 3 Connect to Phone Line
Step 5
Setting Display Options
Uniden Parts Department at (800) 554-3988
Hours: M-F 8:00 a.m. to 5:00 p.m. CST.
We can also be reached on the web at
www.uniden.com
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
• Base unit (1) • Handset (2)
• AC adapter (2) • Rechargeable battery (2)
• Telephone cord (1) • Beltclip (2)
• Charging cradle (1)
• This owner’s manual
• Other printed materials
QUICK REFERENCE GUIDE [ 3]www.uniden.com
Step 1 Checking the Package Contents
E
Language English/French/Spanish
Step 4 Before Using, Register Second Handset to Base
A
After fully charging the handsets, remove the
handset from the charging cradle and place it
in the base. (Base LED light will begin to flash
indicating registration is occurring.)
B
Wait for at least 5 seconds before removing the
second handset from the base.
Congratulations, the registration has been completed,
and your dual handset cordless phone is ready for use!