Filter
Top Products
ADDITIONAL
INFORMATION
ADDITIONAL INFORMATION [ 41]www.uniden.com
You can change the phone’s digital security code on either handset. However, you must
re-register the other handset (not used to change the digital security code) back to the
base unit. See registration on page 13.
Changing the Digital Security Code
The digital security code is an identification code used to connect each handset and the
base unit. Normally, setting the code is not necessary. The first time you charge each
handset in the base, the security code is automatically set.
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
1) Remove the handset from the base unit. Press and hold
find handset on the base.
2) While holding
find handset, place the handset in the base unit, and leave the handset
on the base for more than 3 seconds. A new random security code is set.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
Headset Installation
Your phone may be used with an optional headset, the Uniden HS910.
To use this feature, insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts Department or
visiting the web site, see QUICK REFERENCE GUIDE on page 3.)
• To protect you against
misbilled calls which
might result from your
phone being activated
by other equipment,
the cordless phone
provides AutoSecure
TM
(which electronically
locks your phone when
the handset is in the
base) and Random
Code
TM
digital security
(which automatically
selects one of over
262,000 digital security
codes for the handset
and base).
• If the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is
set automatically the
next time the battery
pack is charged.