Filter
Top Products
GETTING STARTED[ 10 ] www.uniden.com
4) Place the battery case cover back on the handset by sliding
it upwards until it clicks into place.
5) Place one handset in the base unit and one handset in the
charging cradle for 15-20 hours without interruption. The base
or charging cradle unit’s LED light (labeled
charge/in use or
charge) illuminates once the handset is placed in the base or
charging cradle. The LED light will illuminate whether the
battery pack is connected or not.
If the base or charging cradle (
charge/in use or charge) LED
light does not illuminate:
• Check to see if the AC adapter is plugged into each charging
cradle and the electrical wall outlet properly. (Use only the
supplied AC adapter. Do not use any other AC adapter.)
• Check to see if each handset is sitting correctly in each
charging cradle and making good contact with each
charging contacts.