GETTING STARTED
GETTING STARTED [ 17]www.uniden.com
Setting Menu Options
There are five setup options available. They are Caller ID options [AutoTalk, CIDCW
(Caller ID on Call Waiting), Area Code], Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the
talk/flash key.
If the phone rings when AutoTalk is On, simply remove the handset from the base
or charging cradle and the phone automatically answers the call. If the phone rings
when AutoTalk is Off, you must press the
talk/flash key to answer the call.
CIDCW and Dial Mode options can only be set by using Handset 1. If you try to
set by using Handset 2, you will not see these options listed on the LCD screen.
To confirm which handset is HS1, refer to the display indicating “
HS1” or “HS2”.
AutoTalk, Area Code and Language options can be set by using
either Handset 1 or Handset 2.
Caller ID options
To change your AutoTalk and CIDCW:
1) Press and hold the
cid/menu key. The following screen appears.
2) Use the
vol/ring/ or vol/ring/ key to move the pointer
to the selection that you would like to change.
Press the
select/channel key to toggle between “On“ and “Off“ for each setting.
3) Press the
end key and return the handset to the base unit to complete the setting.
The handset returns to standby mode.
The Cordless phone
features include
AutoTalk
TM
and
AutoStandby
TM
.
AutoStandby allows
you to hang up by
simply returning the
handset to the base
or charging cradle.