Filter
Top Products
Feature Operations
Message Waiting
Strata CIX IP5000-series Telephone UG 07/09 71
Turning On/Off MW LED on Another Extension
When an extension is called, the calling party can choose to send a message to the
called party. This is a notification to say that a call has been missed and the calling
party would like to be called back.
By sending a message to another extension you turn on their Msg LED.
1. Dial an internal extension. You may hear ringing or busy tone.
2. Press
Msg or 7. The Msg LED flashes red on the called telephone. At your
telephone, the Msg LED lights steady red and the LCD shows the station number
where the Message Waiting light was sent to.
If you decide to cancel the Message Waiting light at this point, press
Msg or 7
again while ring-over tone is playing and the light will be cancelled, or if you want
to cancel the message later, call the telephone you set the message on and press
7
twice.
3. Press
Spkr. Your Msg LED turns Off. The Msg LED on the called telephone
flashes until the called party presses the flashing
Msg button which calls you back.
4. Turn off the Message LED.
The two ways to turn Off a Message LED are
Method 1
1. Press
#64 plus the extension number that has the message light set.
2. Press
Spkr or hang up to end the call.
Method 2
1. Dial the extension that has the Message LED on.
2. Press
77
3. Press Spkr or hang up to release your telephone.