Filter
Top Products
Administrator Programming
IP5131-SDL Settings
134 Strata CIX IP5000-series Telephone UG 07/09
IP5131-SDL Settings
This section contains instructions to configure the IP5131-SDL telephone. All
instructions found in this section pertain to the items found in the IP Configurations
screen of the IP5131-SDL telephone.
Configurations
Press Hold+3+6+9 (simultaneously) to display the IP
Configurations main screen.
To access any of the screens that relate to an item on
the Configurations screen
Press the soft key that corresponds to the item. The
details pertaining to that item display.
Note The following table explains each of the items
displayed on the Configurations screen.
ITEM INFORMATION DISPLAY
Term Info Displays the Software Version, the MAC address, the Regional Code
and xIPU address. You can press the EXIT soft key to go back to the IP
Configurations screen.
Note This screen is for display only and you cannot make any
changes to the settings.
Network Page 1:Displays or sets the DHCP, IP Address, Subnet, the default
gateway, station information and LIPU Address.
Page 2:Displays or sets node, IPU Mode, Primary IPU, Secondary IPU
and Port Settings.
Page 3:Displays or sets Auto Login Mode and Auto Login password.
Advance Page 1:Displays or sets the Primary Name Server, the Secondary Name
Server, GRQ Port, RRQ Port, and AP Address
Page 2:Displays or sets the Admin address upper and lower bound, the
User ID and password, as well as the Dynamic Port Base.
Page 3:Displays or sets the VLAN Setting, PC Port type and PC Port
VLAN ID.
IP Configurations
Term Info
Network
Advance
Sound
Others
Key Repeat
Net Diag
Factory
Initialize
Reset
Config