Filter
Top Products
Administrator Programming
IP5131-SDL Settings
Strata CIX IP5000-series Telephone UG 07/09 139
DHCP Server Settings
1. Press
Hold+3+6+9 (simultaneously).
2. From the IP Configurations screen, choose Network >
DHCP. The DHCP Mode screen displays.
The current default set is underlined.
3. Press the On or Off soft keys to change the set value.
4. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
Notes
• The Network Setting Screen displays when you press
Set or Cancel.
• DHCP is underlined in the display if you changed the setting.
• If the DHCP setting is changed from On to Off, then the “IP Addr” setting on the
Network Setting screen will be initialized to the initial value.
• The IP5131-SDL gets its IP address, Subnet mask, Default Gateway, DNS server
address from DHCP server.
DHCP Mode
On
Off
[Set] [Cancel]
Config