Filter
Top Products
Administrator Programming
IP5131-SDL Settings
140 Strata CIX IP5000-series Telephone UG 07/09
IP Address
1. Press
Hold+3+6+9 (simultaneously).
2. From the IP Configurations screen, choose Network >
IP Addr. The IP Address screen displays (shown right).
The current IP Address displays.
To change settings on the screen
The following applies to the IP Address, Subnet Mask,
Default Gateway, and Primary DNS Server.
1. Use the dial pad (1~0, *) to enter a new IP address.
Use
*
on the dial pad to enter a period (.) in an IP
address.
2. Press the Set soft key to select the setting change and go
back to the Network Setting Screen.
On the Network Setting Screen, the item you changed
will be underlined in the display (in this case the IP
Address).
3. Pressing the Set soft key can give you an Error Screen if
you incorrectly entered the address.
4. Press the Ok soft key on the Error Screen to correct the
entry. Five seconds after the Error Screen displays, the
screen automatically goes back to the appropriate setting screen (in this case the IP
Address) and the address that resulted in an error will be displayed.
5. Press the Cancel soft key to cancel the setting change and to go to the Network
Setting screen.
IP Address
192.168.0.10
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
Errors
[Ok]
Config
Illegal Data